2022 Ronstan Marine Catalogue - Flipbook - Page 114
TRAVELLER SYSTEMS
112
Series 30 Ball Bearing
RC53047
HALYARD TAIL SYSTEM
TYPICAL SETUP
Mast
For use with furling sails that are
rarely lowered.
1. Car locked in position near the top
of the track.
2. Sail hoisted until soft eye in end of
standing halyard exits mast and can
be placed over the upper attachment
lug on the car.
Standing
halyard with
soft eye end
3. Soft eye of tensioning halyard tail
is placed over lower attachment lug
on car.
Plunger stops
4. When load is taken up by tensioning
halyard tail, plunger stops are lifted
and locked in the “up” (disengaged
position).
Tensioning
tail with soft
eye end
5. Once desired halyard tension is
achieved, plunger stops are released
to engage with stop holes in the track.
6. When load has been transferred to
the locked car, the tensioning halyard
tail may be removed.
Note: 2:1 halyard may be used to reduce
load for use on larger yachts.
To winch
TRACK FASTENINGS – 8mm (5/16”) countersunk fasteners at 100mm (3 15/16”) centres
System includes sliderod car, special 1231mm
(48 15/32”) Series 30 track and two low profile end
stops.
Car has 2 attachment lugs for the soft eye
end of the halyard and tensioning tail.
PRODUCT No.
STOP HOLES – Oversize at 50mm (1 31/32”) centres
Car has dual oversize plunger stops that
can be locked in the “up” position.
Suitable for boats to 16m (53ft)
with 1:1 halyard purchase.
The special track has oversize plunger stop
holes at 50mm (1 31/32”) spacing for the
associated high loads, and is drilled and
tapped to accept the low profile end stops.
Alloy track, car and end stops.
DESCRIPTION
Acetal sliderods.
Grade 316 stainless steel fixtures.
LENGTH
mm
WIDTH
mm
M.W.L.
kg
B.L.
kg
WEIGHT
g
210
575
2300
4600
1940
LENGTH
in
WIDTH
in
M.W.L.
lb
B.L.
lb
8 1/4
2 15/16
5060
10120
WEIGHT
oz
Sliderod
RC53047
Halyard tail system. Sliderod car, includes 2 x plunger stop
and 2 x attachment lugs, 1231mm (48 15/32”) special track,
2 x low profile end stops
68.4
