2025 Ronstan Marine Catalogue - Catalog - Page 116
TRAVELLER SYSTEMS
Series 30 Ball Bearing
114
RC53047
HALYARD TAIL SYSTEM
TYPICAL SETUP
Mast
For use with furling sails that are
rarely lowered.
1. Car locked in position near the top
of the track.
2. Sail hoisted until soft eye in end of
standing halyard exits mast and can be
placed over the upper attachment lug on
the car.
Standing
halyard with
soft eye end
3. Soft eye of tensioning halyard tail
is placed over lower attachment lug on
car.
4. When load is taken up by tensioning
halyard tail, plunger stops are lifted and
locked in the “up” (disengaged position).
Plunger stops
5. Once desired halyard tension is achieved,
plunger stops are released to engage
with stop holes in the track.
Tensioning
tail with soft
eye end
6. When load has been transferred to the
locked car, the tensioning halyard tail may
be removed.
Note: 2:1 halyard may be used to reduce
load for use on larger yachts.
To winch
TRACK FASTENINGS – 8mm (5/16”) countersunk fasteners at 100mm (3 15/16”) centres
System includes sliderod car, special 1231mm
(48 15/32”) Series 30 track and two low profile end
stops.
Car has 2 attachment lugs for the soft eye
end of the halyard and tensioning tail.
PRODUCT No.
STOP HOLES – Oversize at 50mm (1 31/32”) centres
Car has dual oversize plunger stops that
can be locked in the “up” position.
Suitable for boats to 16m (53ft)
with 1:1 halyard purchase.
The special track has oversize plunger stop
holes at 50mm (1 31/32”) spacing for the associated
high loads, and is drilled and
tapped to accept the low profile end stops.
Alloy track, car and end stops.
DESCRIPTION
Acetal sliderods.
Grade 316 stainless steel fixtures.
LENGTH
mm
WIDTH
mm
M.W.L.
kg
B.L.
kg
WEIGHT
g
210
575
2300
4600
1940
LENGTH
in
WIDTH
in
M.W.L.
lb
B.L.
lb
8 1/4
2 15/16
5060
10120
WEIGHT
oz
Sliderod
RC53047
Halyard tail system. Sliderod car, includes 2 x plunger stop
and 2 x attachment lugs, 1231mm (48 15/32”) special track,
2 x low pro昀椀le end stops
68.4
