2025 Ronstan Marine Catalogue - Catalog - Page 248
WORK BOAT SAFETY SYSTEMS
Series 32
235
RC63221
RC63202
RC63286
RC7320-INS
RC6320P
RC6320-1.0
RC6320-1.5
RC6320-2.0
RC6320-3.0
RC6320J
16.3mm (21/32")
5.2mm (7/32")
32mm (1 1/4")
32mm (1 1/4")
15° DEFLECTION
90° X 500MM RADIUS
Strong stainless steel bodies.
Meets the requirements of the Australian National
Standards for Commercial Vessels (NSCV), Part C,
Section 1, 6.17.3 (Pilot Launch – Equipment) and
6.12.7.5.6 (Clipping point strength).
Flared sides and angled ball bearing wheels provide
high load capacity and smooth operation.
Please see ronstan.com for custom track bending.
TRACK FASTENINGS – M6 (1/4”) countersunk fasteners at
100mm (3 15/16”) centres. Unsupported fastening span no
greater than 1500mm (59 1/16”). Each span or join must
be supported by a minimum of two fastenings at each end
at a maximum of 100mm (3 15/16”) centres.
PRODUCT No.
90° x 125mm RADIUS
Grade 316 stainless steel fasteners with a nominal
minimum strength of 700MPa (101ksi), installed at a
torque setting of no more than 7.1Nm (5.2 ft lbf) as per
industry standards.
RC6320 TRACK PROFILE
Commercial work boats and pilot boats.
Grade 316 stainless steel car bodies, wheels, bearing
races, and fixtures.
Grade AL6061-T6 aluminium alloy track.
STOP HOLES – 50mm (2”) centres.
Full installation, usage and maintenance details available
under the SUPPORT tab at www.ronstan.com.
Strength of substrate, backing plates, brackets must be
designed to support a minimum 600kg (1320lb) ultimate
static load.
DESCRIPTION
LENGTH
mm
WEIGHT
g
LENGTH
in
WEIGHT
oz
76
76
98
320
461
260
3
3
3 7/8
11.3
16.3
9.2
996
1496
1996
2996
293
1196
1996
340
90
-
1210
1810
2410
3620
444
1470
2410
255
14
3
39 3/16
58 7/8
78 9/16
117 15/16
11 9/16
47 1/16
78 9/16
13 3/8
3 9/16
-
42.8
64.0
85.2
127.9
15.7
51.8
85.2
9.0
0.5
0.1
Series 32 I-Track Safety System
RC63202
RC63221
RC63286
Car, saddle top
Car, single attachment point, plunger stop
End stop, rubber bu昀昀er
Track – Supplied with RC7320-INS nylon track bolt insulators
RC6320-1.0*
RC6320-1.5*
RC6320-2.0*
RC6320-3.0*
RC6320R125A
RC6320R500A*
RC6320R515A*
RC6320P
RC6320J
RC7320-INS
Track, 996mm (39 3/16”), black
Track, 1496mm (58 7/8”), black
Track, 1996mm (78 9/16”), black
Track, 2996mm (117 15/16”), black
Track, 293mm (11 9/16”), black, 90° x 125mm radius, horizontal A-bend
Track, 1196mm (47 1/16”), black, 90° x 500mm radius, horizontal A-bend
Track, 1996mm (78 9/16”), black, 15° de昀氀ection, horizontal A-bend
Track splice plate, stainless steel
Track joiner
Track bolt insulator
*For standard length track rails, as delivered from the manufacturer, the centre of the last mounting hole at each end of the track rail is located at 48mm (1 29/32”) from the end, and the distance between fasteners across a track
join will be 96mm (3 25/32”). The distance between the two fasteners at the end of each track rail, whether across a join or at an end, must never exceed 100mm (3 15/16”).
